CHFMG - NOVALYTE 400-PL
- MSDS: CHFMG
- Manufacturer: ALDOA COMPANY
- Product Name: NOVALYTE 400-PL
- National Stock Number: 6850-00N086459
Product Identification
Product ID:NOVALYTE 400-PL
MSDS Date:12/01/1997
FSC:6850
NIIN:00N086459
MSDS Number: CHFMG
Responsible Party
DETROIT, MI 48223
US
Emergency Phone: 313-273-5705
Info Phone: 313-273-5705
Preparer: MIRZA BAIG
Cage: ALDXA
Contractor
Telephone: 313-273-5705
Cage: ALDXA
Ingredients
UREA, 2 - THIO-; (THIOUREA) (SARA 313) (CERCLA)
CAS: 62-56-6
RTECS: YU2800000
OSHA PEL N/K
ACGIH TLV: N/K
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE IRRITATION & ALLERGIC SKIN
ERUPTIONS. OVEREXPOSURE CAN PRODUCE GOITER & BONE-MARROW DEPRESSION
IN SOME CASES. OVEREXPOSURE HAS BEEN REPORTED TO PRODUCE HEMOLYTIC
EFFECTS.
Explanation of Carcinogenicity:THIOUREA: IARC MONO, SUPP, VOL 7, PG 56,
1987: GRP 2B. NTP 7TH ANNUAL RPT ON CARCINS, 1994: ANTIC TO BE
CARCIN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . SKIN: WASH THOROUGHLY W/SOAP & H*2O. IN CASE OF ANY DERMAL
DISCOMFORT, GET IMMED MED HELP. LAUNDER CONTAMD CLTHG BEFORE REUSE
. EYES: IMMED FLUSH W/PLENTY OF H*2O FOR AT LEAST 15 MIN. GET IMMED
MED HELP. INGEST: IF SWALLOWED, DRINK LRG AMT OF H*2O. GET IMMED
MED HELP. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
Fire Fighting
Extinguishing Media:WATER.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . THIS MATL EMITS TOX FUMES WHEN ALL WATER IS EVAPORATED
& THE MATERIAL IS HEATED TO ABOVE 174 DEG F.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:WEAR NIOSH APPROVED PROTECTIVE CLOTHING. STOP
LEAK IF YOU CAN DO SO WITHOUT RISK. TAKE UP WITH SAND OR OTHER
NON-COMBUSTIBLE ABSORBENT MATERIAL AND PLACE IN A SUITABLE
CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:IN ACCORDANCE WITH GOOD INDUSTRIAL
PRACTICE, HANDLE WITH DUE CARE AND AVOID UNNECESSARY PERSONAL
CONTACT.
Other Precautions:FOR INDUSTRIAL USE ONLY.
Exposure Controls
Respiratory Protection:NONE GENERALLY REQUIRED. MAY USE NIOSH APPROVED
RESPIRATOR NOSE MASK IF NEEDED.
Ventilation:GENERAL.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
FULL PROTECTIVE CLOTHING INCLUDING RUBBER APRON & RUBBER BOOTS.
Work Hygienic Practices:WASH THOROUGHLY WITH SOAP & WATER BEFORE
HANDLING FOODSTUFF.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, ODORLESS LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:GIVES OFF OXIDES OF CARBON, NITROGEN
AND SULFUR.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.